Applications
Contamination of chemical products, paints, coating.
What if you could...
- Reduce microbial contamination by measures providing immediate response
- Detect early the degradation of products quality due to microbial contamination
- Identify the origins of microbial contamination
- Preview and avoid quality problems on the products
- Reduce water quality consumption
... all with one tool?
Now you can! For surveillance of microbial developments in paints, coatings, polymers and other chemical products, LuminUltraT supplies two product ranges: Quench-goneTM and Total ControlTM, a rapid and accurate test kits for measuring microbial concentration in all products. Tests are based on the measurement of ATP (Adenosine Triphosphate), the energy source of all living cells. ATP measurement is "the best indicator of the concentration of living microorganisms".
Quench-Gone and Total Control
LuminUltra™ products provide an excellent alternative to current monitoring practices! ATP is specific to the microorganisms, and therefore provides a superior means for control of industrial processes. Within 10 minutes required for a complete result, the microbial contamination in raw materials and intermediate products can be evaluated and therefore the performances of industrial process and equipments protected. Final products are thus protected from quality drifts.
Use of Quench-Gone and Total Control
LuminUltra™ tests are the first line of defense against degradation of microbial quality of products - from raw materials up to final products integrating control of industrial process. Use of Quench-Gone and Total Control kits mean:
- Real-time measurement of microbial concentration in raw materials, intermediate or final products.
- Early detection of the degradation of products quality
- Quantification of real total flora: cultivable and non cultivable microorganisms, responsible both for products quality drifts.
- Identification of the origins of the contamination
- Optimization of controls: decrease of culture tests requiring a long delay for response.
Why Choose LuminUltra?
Quench-Gone and Total Control tests provide the following advantages:
Easy: Quench-Gone and Total Control test kit are easily used by any operator or technician and does not require special sampling techniques. Results are easy to interpret and the equipment is entirely portable!
Fast: A single Total Control test takes under 10 minutes to complete on-site! Having immediate feedback facilitates reliable operation and maintenance on a daily basis. Plus, suspect results can be repeated on the spot!
Economical: By comparison with other microbiological analyses, Quench-Gone and Total Control is very economical with a high value per unit cost! Plus, by incorporating the results of Quench-Gone and Total Control analyses, a significant return on investment can be achieved through superior process control!
Flexible: With a wide range of detection capability, Quench-Gone and Total Control tests can analyze any sample or product.
